This is a current ongoing project that entails the construction of the Groundworks and Reinforced Concrete high rise frames to two residential blocks. Block B1 is a 15 storey RC Frame and Block B2 is a 22 storey RC Frame.
We are engaged by Sisk as a domestic Sub-Contractor on an amended form of sub-contract, JCT Design & Build 2011, with design responsibility for the post tensioned slabs and without any other permanent works design responsibility.
The scope of works comprises installing a piling mat and providing piling works attendance, civil engineering diversion works to the existing river Quaggy, reduce level dig including site waste management, constructing RC foundations and RC cores, installing under-slab drainage, site-wide drainage and services incorporating a surface water attenuation tank and pumping chamber and constructing two number high rise RC Frames – one 15 storeys and the other 22 storeys high – using a jump-form method of construction for the two RC cores.
The river Quaggy is an existing river that runs within the site environs. It is partially culverted under the site area where Block B2 will be constructed. This necessitates the river to be diverted to a new location on site and the existing reinforced concrete culverted section under the proposed foundations for Block B2 to be excavated, broken out and removed from site. These works have been completed on site in conjunction with Block B1 works.
The river diversion was created by the installation of a permanent open cut sheet piled culvert. The works comprised installation of permanent sheet piling to form a culvert, reinforced capping beam to the top of the sheet piling, excavation of the culvert channel, installation of a 500mm thick clay liner, installation of a 200mm thick filter layer (20mm stone) and a 400mm layer of Rip-Rap stone as the finished layer to the river bed. The ‘Rip-Rap’ stone was positioned so as to form a curve in the river.
Once the river diversion was in place we proceeded to break out the existing reinforced concrete culvert, 4.00m wide x 2.40m deep. The void was backfilled with 6F2 imported material, compacted in layers.
We constructed the high rise RC core to block B1 using a jump-form method of construction. All of the suspended RC floors to both blocks are post tensioned with a package value of circa £350k. These have been value engineered by us and designed and installed by our specialist contractor.
The internal staircases to both blocks are cast in-situ using the ‘Flexistairs’ system of permanent formwork.
Block B1 was completed in August 2016 which was six weeks ahead of our contracted programme duration. Block B2 will commence during December 2016.
The scope of work entails:
Our operative, Ioan-Iulian Costan won the Thorn Turn, Highways Depot project Health and safety award for November 2016. Read more...
Modebest are proud to have won a CONSTRUCT Innovation Award at the annual awards during October 2016. Our project at Abbey Mills, Shaft F, for our client MVB Joint Venture, was the overall winner in the category of Projects over £2.50M that exemplify innovation and people talent in the concrete sector. Read more...
Modebest are delighted to have recently been awarded a civil engineering contract by our client Morgan Sindall for a project, Thorn Turn Waste Park & Highways Depot. Read more...
Modebest are engaged as a Principle Contractor for a Design & Build project at Fulham High Street. The project is for the Enabling and Archaeological works incorporating sheet piling to the basement, bored piling, basement excavation and reinforced concrete foundations. Read more...
“We are committed to enhancing our company’s image and profile in the market place by addressing issues relating to corporate and social responsibility”
29 Fourth Way,
HA9 0LH, UK